Final Cleanup

We're about done!! A last few quick items and we'll be there....

You can remove the tape off the top of the USB port if you like. It's just there to allow the assembly machine to pick up the part when assembling the board.

Carefully remove the protective tape from the front of the Raspberry Pi Camera module.

That's all! Have a quick final inspection of the overall unit, give the screws a final check and get ready to do some fun things with Spirit!

The section on getting started with actually using the robot and programming is still in the works. We wanted to get this assembly guide out right away for those receiving their Kickstarter reward units. Be patient and enjoy admiring what you've created and we'll be back soon with more. Cheers!!